{"id":1628,"date":"2018-01-31T06:02:52","date_gmt":"2018-01-31T06:02:52","guid":{"rendered":"http:\/\/10.0.1.201\/mech\/?page_id=1628"},"modified":"2021-08-15T10:16:39","modified_gmt":"2021-08-15T10:16:39","slug":"consultancy","status":"publish","type":"page","link":"https:\/\/www.vrsiddhartha.ac.in\/me\/consultancy\/","title":{"rendered":"Consultancy"},"content":{"rendered":"

[vc_row][vc_column]

\n\t\t\t

Consultancy<\/h2>\n\t\t\t<\/div>[\/vc_column][\/vc_row][vc_row][vc_column][vc_tta_tour][vc_tta_section title=”Direct Thermal Conductivity” tab_id=”1628656230803-204dd767-b7ca”]
\n\t\t\t

Direct Thermal Conductivity<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong> Measurement of thermal conductivity of materials<\/div>\n
Make:<\/strong> TA Instruments, Model: DTC 300<\/div>\n
Specifications: <\/strong>Thermal conductivity range: 0.1 to 40 W\/mK<\/div>\n
Temperature Range:<\/strong> 20 o<\/sup>C\u00a0 to 300 o<\/sup>C<\/div>\n
Standard:<\/strong> \u00a0ASTM E1350<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Impact Tester” tab_id=”1628656230811-7d231dce-8158″]

\n\t\t\t

Impact Tester<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong> Impact strength of polymer composite materials<\/div>\n
Make:<\/strong> M\/s. International Equipment\u2019s., Mumbai<\/div>\n
Energy Max:<\/strong> 22 J<\/div>\n
Standard:<\/strong> \u00a0ASTM D256<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Wear Test Rig” tab_id=”1628659425126-b74cc316-d708″]

\n\t\t\t

Wear Test Rig<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong>\u00a0 Wear and frictional force of materials<\/div>\n
Ducom Instruments, Bangalore<\/div>\n
Specifications:<\/strong><\/div>\n
Load:\u00a0 200N<\/div>\n
Pin Heating Temp: 400o<\/sup>C<\/div>\n
Disc Size : 165 X 8 mm<\/div>\n
Pin holders: 3, 4, 6, 8, 10 & 12 mm<\/div>\n
Standard: <\/strong>ASTM G99<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Tensometer” tab_id=”1628659450027-ca21e6ca-cc1c”]

\n\t\t\t

Tensometer<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong> \u00a0Tensile and flexural properties of polymer composite materials<\/div>\n
Specifications:<\/strong><\/div>\n
Load cell: 20 kN<\/div>\n
Elongation: 0 to 500 mm with least count: 0.1mm<\/div>\n
Test speed: 0.2 mm\/min to 500mm\/min<\/div>\n
\u00a0Standard<\/strong>: Tensile –<\/strong>ASTM D638M \u00a0, \u00a0\u00a0\u00a0\u00a0Flexural – ASTM D 790M<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Sonicator” tab_id=”1628659485797-28945684-9178″]

\n\t\t\t

Sonicator<\/h2>\n\t\t\t\t

<\/p>\n

Purpose: Mixing of Nano particles with liquids<\/div>\n
Make: TRANS-O-SONIC, Mumbai<\/div>\n
Frequency 30 kHz<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Dilatometer” tab_id=”1628659502134-3866ccf7-75b1″]

\n\t\t\t

Dilatometer<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong> Measurement of thermal expansion of materials<\/div>\n
Supplied by VB Ceramic Consultant, Chennai<\/div>\n
Temperature: Up to 1000 \u00b0C<\/div>\n
Accuracy: 0.1 \u00b5m<\/div>\n
<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Durometer” tab_id=”1628659585030-9fa0110a-2384″]

\n\t\t\t

Durometer (Shore D Hardness Tester)<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong>\u00a0 Hardness of polymer composite materials<\/div>\n
Range:\u00a0 0 to 100 HD<\/div>\n
Standard:\u00a0 ASTM D2240<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Computer Integrated Optical Microscope” tab_id=”1628659633133-22f9c740-7b04″]

\n\t\t\t

Computer Integrated Optical Microscope<\/h2>\n\t\t\t\t

\"\"<\/p>\n

Our Metallurgical Microscope meets wide-variety of analysis applications, from a routine inspection to sophisticated analysis of weld metal study. We have Metallurgical Image Analysis Software with Accuracy, repeatability and authentic results. Most advance & user friendly and User defined macro.
\n1. Batch runs facilities available.
\n2. 1:1 magnification and equivalent field of view Database.
\n3. Online image processing.
\n4. Any type of customization possible with our software.
\n5. Calibration traceable to NABL standard.
\n6. Color Images Processing.
\n7. Phase analysis based on color and shapes.
\n8. Image of any size can be processed.
\n9. Capture speed one image \/ second.
\n10. Online capture and simultaneous processing of many no of images at very short duration.
\n11. Data and images can be transferred to both word and excel format
\n12. Micron Marker incorporated in the image.<\/p>\n

<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Optical System<\/td>\nPlan Achromatic, Antireflection coated Optical system<\/td>\n<\/tr>\n
Stand<\/td>\nSturdy build inverted Microscope design<\/td>\n<\/tr>\n
Observation Head<\/td>\nHigh Transmission sidentopf Trinocular<\/td>\n<\/tr>\n
Eye pieces<\/strong><\/td>\nWF 10x (Paired)<\/strong><\/td>\n<\/tr>\n
Plan Objectives (Anti Fungus)<\/strong><\/td>\nMultilayer, Anti reflection coated plan metallurgical<\/strong><\/p>\n

objectives from Kyowa optics Japan consists of PLM 5X, PLM10x, PLM 20x and PLM 50x<\/strong><\/td>\n<\/tr>\n

Focusing<\/td>\nLow Position coaxial coarse and fine adjustment on ball track movement fro-greater reliability. Coarse motion range 35mm.<\/p>\n

Fine Focus range 1.4mm<\/td>\n<\/tr>\n

Nosepiece<\/td>\nQuadruple ball bearing nosepiece for perfect alignment<\/td>\n<\/tr>\n
Stage<\/td>\nCoaxial graduated mechanical stage 180 mm x 150mm with z-<\/p>\n

y travel 75 mm x 50 mm<\/td>\n<\/tr>\n

Incident<\/td>\nBuilt in Koehler\u2019s incident illuminations with 6v \/20w<\/td>\n<\/tr>\n
Illumination<\/td>\nHalogen Lamp, field and aperture diaphragm, also having<\/p>\n

filters slot for yellow and green filters.<\/td>\n<\/tr>\n

Magnification<\/strong><\/td>\n50X\u00a0 to\u00a0 500X<\/strong><\/td>\n<\/tr>\n
Polarizing Attachment<\/td>\nIncident Polarizing Attachment for examination of inclusions,<\/p>\n

bubbles, etching & scratches on materials with bire fringance.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Variable Compression Ratio CI Engine” tab_id=”1628659745308-9afca246-0e08″]

\n\t\t\t

Variable Compression<\/h2>\n\t\t\t\t

Purpose: Performance and emission characteristics of Bio diesel
\nSpecifications:
\nKirloskar, 4 Stroke 1 Cylinder Water Cooled Diesel Engine
\nRated Power: 3.7KW (5HP)
\nBore Diameter: 80mm
\nStroke Length: 562cc
\nCompression Ratio: 12:1 to 20:1<\/p>\n

\"\"<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Coordinate Measuring Machine” tab_id=”1628659846878-5fa1890f-bc38″]

\n\t\t\t

COORDINATE MEASURING MACHINE (CMM)<\/h2>\n\t\t\t\t

Purpose: Measurement of geometric characteristics of an object
\nMake & Model : Accurate India, Spectra
\nSpecifications: Operation: CNC
\nOverall Machine Dimensions (LxWxH): 1500 x 1445 x 2350 mm
\nMeasuring Range: X axis: 500mm, Y axis: 600mm, Z axis: 400mm
\nMax. Permissible error: 2.2 micron<\/p>\n

\"\"<\/p>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Profile Projector” tab_id=”1628659894468-db88009a-4640″]

\n\t\t\t

Profile Projector<\/h2>\n\t\t\t\t

Purpose: Linear and Angular Measurement
\nMake: OPTOMECH, Model: 300 TE Table Top Vertical Profile Projector
\nSpecifications: Magnification: 20X
\nWork Piece Capacity: 1) Load Capacity: 20 kgs
\n2) Max Diameter: 150 mm
\nAccuracy: +\/- 0.1%
\nLeast Count: 0.001 and 2min<\/p>\n

\"\"<\/p>\n\t\t<\/div>[\/vc_tta_section][vc_tta_section title=”Surface Tester” tab_id=”1628659911901-36e39b5f-0278″]

\n\t\t\t

Surface Tester<\/h2>\n\t\t\t\t

<\/p>\n

Purpose:<\/strong> Surface roughness measurement<\/div>\n
Make:<\/strong> MITUTOYO Stylus type, Model: SJ210,<\/div>\n
Specifications: <\/strong>Measuring Speed : Measuring: 0.25 mm\/s, 0.5 mm\/s, 0.75 mm\/s Returning: 1 mm\/s<\/div>\n
Measuring Force\/Stylus Tip: 0.75 mN Type: 0.75 mN \/ 2 \u00b5m R 60\u00b0 4 mN Type: 4 mN \/ 5 \u00b5m R 90\u00b0<\/div>\n
Analysis Graphs:<\/strong> Bearing area curve, Amplitude distribution curve<\/div>\n
Sampling Length:<\/strong> 0.08mm, 0.25 mm, 0.8 mm, 2.5 mma<\/div>\n
<\/div>\n
\"\"<\/div>\n

<\/p>\n\t\t<\/div>[\/vc_tta_section][\/vc_tta_tour][\/vc_column][\/vc_row]<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

[vc_row][vc_column][\/vc_column][\/vc_row][vc_row][vc_column][vc_tta_tour][vc_tta_section title=”Direct Thermal Conductivity” tab_id=”1628656230803-204dd767-b7ca”][\/vc_tta_section][vc_tta_section title=”Impact Tester” tab_id=”1628656230811-7d231dce-8158″][\/vc_tta_section][vc_tta_section title=”Wear Test Rig” tab_id=”1628659425126-b74cc316-d708″][\/vc_tta_section][vc_tta_section title=”Tensometer” tab_id=”1628659450027-ca21e6ca-cc1c”][\/vc_tta_section][vc_tta_section title=”Sonicator” tab_id=”1628659485797-28945684-9178″][\/vc_tta_section][vc_tta_section title=”Dilatometer” tab_id=”1628659502134-3866ccf7-75b1″][\/vc_tta_section][vc_tta_section title=”Durometer” tab_id=”1628659585030-9fa0110a-2384″][\/vc_tta_section][vc_tta_section title=”Computer Integrated Optical Microscope” tab_id=”1628659633133-22f9c740-7b04″][\/vc_tta_section][vc_tta_section title=”Variable Compression Ratio CI Engine” tab_id=”1628659745308-9afca246-0e08″][\/vc_tta_section][vc_tta_section title=”Coordinate Measuring Machine” tab_id=”1628659846878-5fa1890f-bc38″][\/vc_tta_section][vc_tta_section title=”Profile Projector” tab_id=”1628659894468-db88009a-4640″][\/vc_tta_section][vc_tta_section title=”Surface Tester” tab_id=”1628659911901-36e39b5f-0278″][\/vc_tta_section][\/vc_tta_tour][\/vc_column][\/vc_row]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-1628","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/pages\/1628","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/comments?post=1628"}],"version-history":[{"count":41,"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/pages\/1628\/revisions"}],"predecessor-version":[{"id":2945,"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/pages\/1628\/revisions\/2945"}],"wp:attachment":[{"href":"https:\/\/www.vrsiddhartha.ac.in\/me\/wp-json\/wp\/v2\/media?parent=1628"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}